|
Other Items from Radiator
Opacity (Smoke) Meter OPAX - Partial flow opacity meter for diesel engine emissions testing on cars and light trucks and heavy-duty commercial vehicles. OPAX 2000 - II complies with most important standards worldwide like EEC 72/306, ISO 3173, ISO 11614 and SAE J 1667; it is approved for statutory test in many countries around the world.
Pipe End Shaper - Rounds Pipes In or Out. The Lisle 32000 rounds out exhaust pipes that are crushed or bent. Also reshapes pipes bent or flared out by placing big end over pipe. Range is 1 1/2 inch - 3 5/8 inch (38.1 - 92mm).
Leak Tamer Plus EVAP OTC6521 - Plus Evap System
Exhaust and Manifold Spring Clip Spring Tensioner - Features and Benefits:For R and R of spring clips on exhaust manifold on Volkswagen Sirocco and Rabbit
Exhaust and Tailpipe Cutter - Exhaust and Tailpipe Cutter
Exhaust / Strut Cutoff Tool - Cuts Out-of-Round Pipes. Four knife-edged cutting wheels cut quickly and cleanly. Can be operated with one hand. Less than 1/3 turn cuts all the way around the pipe. Unique design allows tool to inchshift inch to make out-of-round cut. Big 1 3/8 inch to
Tailpipe Expander - Removes clamp grooves and rounds out pipes. Practical, rugged tools that make easy work of a tough job. Two sizes fit most pipes: 32500 - 1 5/8 inch to 2 7/16 (41.3mm - 61.9mm) and the 32750 - 2 3/8 inch to 3 1/4 inch (60.3mm - 82.5mm).
Exhaust Manifold Spreader - For Reinstalling the Manifold on Small Block Chevrolets. A simple way to expand a warped manifold so all bolt holes are accurately aligned. Helps prevent cross-threading of manifold bolts. Works best when used in pairs. Or install before removing manifold
Exhaust "Donut" Stretcher - Removes and Installs Rubber Mounting Ring-Style Hangers Found on Import Cars.Just place the hook of the tool through the rubber mounting ring. Then pull or push to stretch until you can remove ring from the hook on muffler, pipe or frame. Reverse procedu
Exhaust Removal Pliers - Separates Exhaust Hanger Brackets From Rubber Supports. The exhaust plier works on all import and domestic car and truck exhaust systems that use the rubber hanger supports. Simply squeeze the plier handles to force the bracket from the rubber support.
Tailpipe Expander - Removes clamp grooves and rounds out pipes. Practical, rugged tools that make easy work of a tough job. Two sizes fit most pipes: 32500 - 1 5/8 inch to 2 7/16 (41.3mm - 61.9mm) and the 32750 - 2 3/8 inch to 3 1/4 inch (60.3mm - 82.5mm).
|
