|
| Browse Catalog [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] ... |
|
High Performance 12-Ton Telescopic Bottle Jack
12-ton telescopic bottle jack.
|
High Performance 20-Ton Bottle Jack
20-ton bottle jack.
|
High Powered 13 Amp Sawzall with 360 degree Rotating Handle 6523-21
13 Amp Milwaukee Built Motor, Orbital Cutting Action, Variable Speed Trigger, 0-3000 SPM, 1-1/4? Stroke, Counter Balanced/Gear Protection Systems, Speed Dial, Quik-Lok Cord, Voltage: 120 AC/DC, Tool weight: 10.0 lbs.
|
|
High Pressure Control Valve
|
High Pressure Spray Gun, 2.0mm nozzle
|
High Pressure Spray Gun, Suction type, 1.5mm nozzle
|
|
Features and Benefits:
20,000 Rpm
Built in regulator for control
Comes with 3 in., 4-1/2 in. & 5-1/2 in. pads
|
Features and Benefits:Built-in regulatorJacobs chuck for holding buffing accessoriesLock off throttle to prevent accidental start ups
|
High Volume Air Rim Clamp Tire Changer with Extended Clamps
High Volume Air Rim Clamp Tire Changer with Extended Clamps
|
|
High Volume Electric Rim Clamp Tire Changer with Extended Clamps
High Volume Electric Rim Clamp Tire Changer with Extended Clamps
|
Effortless air-powered hydraulic lift system allows unit to be used as a multi-purpose lift in a variety of applications.
|
Checks Both Low Voltage and Spark Plug Wires. The low-side checks AC and DC current up to 28 volts with power on. The high-side checks spark plug wires without piercing. Complete with insulated clip.
|
|
High-Low Voltage Tester
|
High-Volume Air Adjusting Valve with Gauge
High-Volume Air Adjusting Valve with Gauge
|
Includes Hinge butt templet, Mortising Bit, Templet Guide, Lock Nut, Carrying Case and Operating Manual. Will do 6'6 inch, 6'8 inch, and 7' jambs and doors, and 3 inch to 6 inch hinges. Hinge Butt Templet #59380, Mortising Bit #43446, Templet Guide #42042
|
|
HINGE HANDLE REPAIR KIT FOR 5466
Set of replacement parts for hinge handles, codes: 5468H, 5468, 5467H, 5467, 5466H, 5466.
|
HINGE HANDLE REPAIR KIT FOR 5668
Set of replacement parts for hinge handle. Codes: 5668 and 5668H.
|
1/2 inch Hammer Drill, 8.3 amp motor, variable speed
|
|
1/2 inch Reversible Drill, 0-850 rpm, with powerful 9.0 amp motor
|
1/2 inch Hammer Drill, 8.3 amp motor
|
Hitachi 1/2 inch Heavy Duty Drill with 6.2 amp motor, 550 rpm, and 477.4 in. lbs. Of torque. Tool weight: 7.0 lbs.
|
|
1/4 inch Die Grinder, 4.7 amp motor, 25,000 rpm
|
Hitachi 10" Sliding Compound Miter Saw
10 inch Sliding Compound Miter Saw,
|
Hitachi 1-1/2" Rotary Hammer, Spline Shank
1-1/2 inch Rotary Hammer, Spline Shank, 17 lbs
|
|
12 inch Cut-off Saw,
|
Hitachi 1-3/16" SDS Plus Rotary Hammer
Hitachi 1-3/16 inch SDS Plus Rotary Hammer, Variable Speed Reversible, 810 Watt motor. Tool weight: 10.6 lbs.
|
14 inch Chop Saw, 15 Amp motor
|
|
Hitachi 14.4 Volt Cordless Drill Kit w/2 Batteries
14.4 Volt 3/8 inch, Cordless Drill kit w/2 Batteries
|
Hitachi 15/16" SDS Plus Rotary Hammer
Hitachi 15/16 inch SDS Rotary Hammer, Electronic variable speed, 6.3 amp motor, Tool weight: 5.5 lbs.
|
Hitachi 3/4" Demolition Hammer
3/4 inch Hex Demolition Hammer, 24.3 lbs, 11.8 ft. lbs. of Impact energy
|
|
3/8 inch Electric Drill 0-2500 RPM, Reversible
|
Hitachi 3/8" Right Angle Drill,
Hitachi 3/8 inch Right Angle Drill, with speed dial
|
3-1/4 inch Planer, 3.4 amp motor,
|
|
4 inch Angle Grinder, 5 amp motor
|
Hitachi 40 lb Demolition Hammer
40 lb Demolition Hammer, 11.4 amp motor, 1-1/8 inch Shank
|
4-1/2 inch Angle Grinder,
|
|
5/8 inch Hammer drill, 5 amp motor, 2 mode
|
7 inch Angle Grinder, 15 Amp motor, 6,000 rpm, 11.9 lbs
|
7 inch Angle Sander, 2 speed, 0-600/3,400rpm with electronic speed control
|
|
Hitachi 7" Hook & Loop Polisher
7 inch Hook & Loop Polisher, 11 amp motor, 0-600/3,400 rpm
|
Hitachi 70 lb Demolition Hammer with Cart
70 lb Demolition Hammer with Cart, 1-1/8 inch Hex Shank
|
Hitachi 7-1/4" Circular Saw, No-Brake
7-1/4 inch Circular Saw, 15 Amp,
|
|
Hitachi 8-1/4 inch Circular Saw with 13 Amp motor. Tool weight: 11.0 lbs.
|
Hitachi 9.6 Volt Cordless Drill Kit with 2 Batteries
9.6 Volt Cordless Drill kit with 2 Batteries, with Flashlight, 1 hour charger
|
Hitachi 9.6 Volt Driver Drill Kit with Electric Brake
Histachi 9.6 Volt Driver Drill Kit with Electric Brake, Variable Speed, 22 position adjustable torque setting. Tool weight: 3.2 lbs.
|
|
Hitachi Coil Roofing Nailer, 7/8 inch to 1-3/4 inch Capacity, Tool weight: 5.5 lbs.
|
Hitachi Drywall Screwdriver Gun, 6.4 amp motor, 0-4000 rpm, and 25 ft. cord. Tool weight: 2.9 lbs.
|
Hitachi Framing Nailer, Full head nails 2-3/8 inch to 3-1/2 inch Capacity. Tool weight: 8.9 lbs.
|
|
Hitachi Full Round Head, Coil Wire Collation Nailer
Hitachi Coil Wire Collation and case hardened nail gun, 2 inch- 3-1/4 inch capacity. Tool weight: 8.2 lbs.
|
Hitachi Jigsaw, 5.8 Amp, Electronic Variable Speed, Orbital
|
|
 |
||
| E-commerce powered by MonsterCommerce shopping cart. |