1.5 CFM Vacuum Pump

1.5 CFM Vacuum Pump
More Info

1.5 HP, 120V, 8 Gallon, 1-Stage, 6.5 CFM Compressor

1.5 HP, 120V, 8 Gallon, 1-Stage, 6.5 CFM Compressor
More Info

1.5 Ton Transmission Jack 7752C

1-1/2 Ton Transmission Jack
More Info

1.5" Gasoline Water Pump

1.5" Gasoline Water Pump powered by 4-stroke direct injection engine.
More Info

1.8mm HVLP Gravity Feed Spray Gun

Locking pressure regulator with gauge, Stainless steel needle, 600cc plastic paint cup, Air Inlte: ?, Air Consumption: 7.0-9.0 CFM.
More Info

1/18 Scale Resin Ford 427 Engine Replica

1/18 Scale Resin Ford 427 Engine Replica
More Info

1/18 Scale Resin Hemi 426 Engine Replica

1/18 Scale Resin Hemi 426 Engine Replica
More Info

1/2 Titanium Duty Air Impact Wrench 2135QTIMAX-2

1/2" Titanium Duty Air Impact Wrench 2135QTIMAX-2
More Info

1/2 , 18 Volt Compact Drill/Driver Kit with Two Batteries

Compact size: fits into the tightest conditions. Lightweight design (5.2 lbs.) minimizes user fatigue. High performance motor delivers 450 in-lbs of maximum torque. Dual speed range: 0-450/0-1,500 rpm delivers optimal performance. 1/2 inch single sleeve k
More Info

1/2 , 18 Volt Hammer/Drill Driver Kit with Two Batteries

DEWALT built high torque motor delivers 500 in-lbs of maximum torque. XRP? extended run-time batteries provide long run-time & battery life. Patented 3-speed transmission features a maximum 3rd speed At 2,000 rpm. Hammer drill mode: 34,000 bpm drills fast
More Info

1/2 in Super Duty Air impact Wrench 231HA

1/2 in Super Duty Air impact Wrench 231HA
More Info

1/2 IN DR 12 MM HEX TIP CHROME SOCKET

Tip sise: 12 mm, Tip length: 1-3/4" inches, Total length: 3-1/4" inches, Weight: 0.26 lbs.
More Info

1/2 IN DR 12-PT 1-5/16 IN CHROME SOCKET

The 1/2" socket line, like the 3/8" line, is used primarily for automobile maintenance and general mechanical work. They can withstand higher torque and more work space is needed to use them, but they have broader application ranges: Socket hex sizes: 1/4
More Info

1/2 IN DR 14 MM HEX TIP CHROME SOCKET

Tip sise: 14 mm, Tip length: 1-7/8" inches, Total length: 3-5/8" inches, Weight: 0.48 lbs.
More Info

1/2 IN DR 17 MM HEX TIP CHROME SOCKET

Tip sise: 17 mm, Tip length: 2" inches, Total length: 4" inches, Weight: 0.88 lbs.
More Info

1/2 IN DR 6-PT 10 MM CHROME SOCKET

Hex size: 10 mm, Length: 1-1/2" inches, (Outer Diameter) Hex-end: 14.2 mm, Drive-end: 21.8 mm, Hex-end depth: 6.7 mm, Weight: 0.12 lbs. Torque strength ASME/ANSI B107.5: 1354 lb-inches.
More Info

1/2 IN DR 6-PT 10 MM IMPACT SOCKET

Hex size: 10 mm, Length: 1-1/2" inches, (Outer Diameter) Hex-end: 5/8" inches, Drive-end: 7/8" inches, Hex-end depth: 1/2" inches, Weight: 0.33 lbs. Torque strength ASME/ANSI B107.33: 1500 lb-inches.
More Info

1/2 IN DR 6-PT 11 MM CHROME SOCKET

Hex size: 11 mm, Length: 1-1/2" inches, (Outer Diameter) Hex-end: 17.0 mm, Drive-end: 22.1 mm, Hex-end depth: 8.7 mm, Weight: 0.13 lbs. Torque strength ASME/ANSI B107.5: 1504 lb-inches.
More Info

1/2 IN DR 6-PT 1-1/2 IN IMPACT SOCKET

Hex size: 1-1/2" inches, Length: 1-15/16" inches, (Outer Diameter) Hex-end: 2-1/16" inches, Drive-end: 2-1/16" inches, Hex-end depth: 15/16" inches, Weight: 2.40 lbs. Torque strength ASME/ANSI B107.2: 5000 lb-inches.
More Info

1/2 IN DR 6-PT 12 MM CHROME SOCKET

Hex size: 12 mm, Length: 1-1/2" inches, (Outer Diameter) Hex-end: 18.5 mm, Drive-end: 22.1 mm, Hex-end depth: 8.9 mm, Weight: 0.13 lbs. Torque strength ASME/ANSI B107.5: 1796 lb-inches.
More Info

1/2 IN DR 6-PT 12 MM IMPACT SOCKET

Hex size: 12 mm, Length: 1-1/2" inches, (Outer Diameter) Hex-end: 3/4" inches, Drive-end: 7/8" inches, Hex-end depth: 1/2" inches, Weight: 0.40 lbs. Torque strength ASME/ANSI B107.33: 2000 lb-inches.
More Info

1/2 IN DR 6-PT 13 MM CHROME SOCKET

Hex size: 13 mm, Length: 1-1/2" inches, (Outer Diameter) Hex-end: 19.0 mm, Drive-end: 22.1 mm, Hex-end depth: 9.0 mm, Weight: 0.15 lbs. Torque strength ASME/ANSI B107.5: 2203 lb-inches.
More Info

1/2 IN DR 6-PT 13 MM IMPACT SOCKET

Hex size: 13 mm, Length: 1-1/2" inches, (Outer Diameter) Hex-end: 13/16" inches, Drive-end: 15/16" inches, Hex-end depth: 1/2" inches, Weight: 0.40 lbs. Torque strength ASME/ANSI B107.33: 2600 lb-inches.
More Info

1/2 IN DR 6-PT 1-3/16 IN IMPACT SOCKET

Hex size: 1-3/16" inches, Length: 1-9/16" inches, (Outer Diameter) Hex-end: 1-5/8" inches, Drive-end: 1-5/8" inches, Hex-end depth: 5/8" inches, Weight: 1.87 lbs. Torque strength ASME/ANSI B107.2: 5000 lb-inches.
More Info

1/2 IN DR 6-PT 1-3/8 IN IMPACT SOCKET

Hex size: 1-3/8" inches, Length: 1-15/16" inches, (Outer Diameter) Hex-end: 1-7/8" inches, Drive-end: 1-7/8" inches, Hex-end depth: 15/16" inches, Weight: 2.12 lbs. Torque strength ASME/ANSI B107.2: 5000 lb-inches.
More Info

1/2 IN DR 6-PT 14 MM CHROME SOCKET

Hex size: 14 mm, Length: 1-1/2" inches, (Outer Diameter) Hex-end: 20.5 mm, Drive-end: 22.1 mm, Hex-end depth: 9.0 mm, Weight: 0.14 lbs. Torque strength ASME/ANSI B107.5: 2495 lb-inches.
More Info

1/2 IN DR 6-PT 14 MM IMPACT SOCKET

Hex size: 14 mm, Length: 1-1/2" inches, (Outer Diameter) Hex-end: 7/8" inches, Drive-end: 15/16" inches, Hex-end depth: 1/2" inches, Weight: 0.40 lbs. Torque strength ASME/ANSI B107.33: 2600 lb-inches.
More Info

1/2 IN DR 6-PT 15 MM CHROME SOCKET

Hex size: 15 mm, Length: 1-1/2" inches, (Outer Diameter) Hex-end: 22.1 mm, Drive-end: 22.1 mm, Hex-end depth: 11.1 mm, Weight: 0.17 lbs. Torque strength ASME/ANSI B107.5: 3000 lb-inches.
More Info

1/2 IN DR 6-PT 15 MM IMPACT SOCKET

Hex size: 15 mm, Length: 1-1/2" inches, (Outer Diameter) Hex-end: 7/8" inches, Drive-end: 1" inches, Hex-end depth: 1/2" inches, Weight: 0.49 lbs. Torque strength ASME/ANSI B107.33: 3300 lb-inches.
More Info

1/2 IN DR 6-PT 1-5/16 IN IMPACT SOCKET

Hex size: 1-5/16" inches, Length: 1-11/16" inches, (Outer Diameter) Hex-end: 1-3/4" inches, Drive-end: 1-3/4" inches, Hex-end depth: 3/4" inches, Weight: 2.03 lbs. Torque strength ASME/ANSI B107.2: 5000 lb-inches.
More Info

1/2 IN DR 6-PT 16 MM CHROME SOCKET

Hex size: 16 mm, Length: 1-1/2" inches, (Outer Diameter) Hex-end: 23.7 mm, Drive-end: 23.7 mm, Hex-end depth: 11.7 mm, Weight: 0.15 lbs. Torque strength ASME/ANSI B107.5: 3601 lb-inches.
More Info

1/2 IN DR 6-PT 16 MM IMPACT SOCKET

Hex size: 16 mm, Length: 1-1/2" inches, (Outer Diameter) Hex-end: 1" inches, Drive-end: 1" inches, Hex-end depth: 1/2" inches, Weight: 0.49 lbs. Torque strength ASME/ANSI B107.33: 3300 lb-inches.
More Info

1/2 IN DR 6-PT 17 MM CHROME SOCKET

Hex size: 17 mm, Length: 1-1/2" inches, (Outer Diameter) Hex-end: 25.3 mm, Drive-end: 25.3 mm, Hex-end depth: 12.7 mm, Weight: 0.19 lbs. Torque strength ASME/ANSI B107.5: 4203 lb-inches.
More Info

1/2 IN DR 6-PT 1-7/16 IN IMPACT SOCKET

Hex size: 1-7/16" inches, Length: 1-15/16" inches, (Outer Diameter) Hex-end: 2" inches, Drive-end: 2" inches, Hex-end depth: 15/16" inches, Weight: 2.23 lbs. Torque strength ASME/ANSI B107.2: 5000 lb-inches.
More Info

1/2 IN DR 6-PT 18 MM CHROME SOCKET

Hex size: 18 mm, Length: 1-1/2" inches, (Outer Diameter) Hex-end: 26.9 mm, Drive-end: 26.9 mm, Hex-end depth: 14.2 mm, Weight: 0.20 lbs. Torque strength ASME/ANSI B107.5: 4796 lb-inches.
More Info

1/2 IN DR 6-PT 18 MM IMPACT SOCKET

Hex size: 18 mm, Length: 1-1/2" inches, (Outer Diameter) Hex-end: 1-1/16" inches, Drive-end: 1-1/16" inches, Hex-end depth: 1/2" inches, Weight: 0.60 lbs. Torque strength ASME/ANSI B107.33: 5000 lb-inches.
More Info

1/2 IN DR 6-PT 19 MM CHROME SOCKET

Hex size: 19 mm, Length: 1-1/2" inches, (Outer Diameter) Hex-end: 26.9 mm, Drive-end: 26.9 mm, Hex-end depth: 14.9 mm, Weight: 0.20 lbs. Torque strength ASME/ANSI B107.5: 5000 lb-inches.
More Info

1/2 IN DR 6-PT 20 MM CHROME SOCKET

Hex size: 20 mm, Length: 1-1/2" inches, (Outer Diameter) Hex-end: 28.5 mm, Drive-end: 28.5 mm, Hex-end depth: 15.7 mm, Weight: 0.22 lbs. Torque strength ASME/ANSI B107.5: 5044 lb-inches.
More Info

1/2 IN DR 6-PT 20 MM IMPACT SOCKET

Hex size: 20 mm, Length: 1-1/2" inches, (Outer Diameter) Hex-end: 1-3/16" inches, Drive-end: 1-3/16" inches, Hex-end depth: 1/2" inches, Weight: 0.57 lbs. Torque strength ASME/ANSI B107.33: 5000 lb-inches.
More Info

1/2 IN DR 6-PT 21 MM CHROME SOCKET

Hex size: 21 mm, Length: 1-1/2" inches, (Outer Diameter) Hex-end: 28.5 mm, Drive-end: 28.5 mm, Hex-end depth: 16.5 mm, Weight: 0.23 lbs. Torque strength ASME/ANSI B107.5: 5044 lb-inches.
More Info

1/2 IN DR 6-PT 21 MM IMPACT SOCKET

Hex size: 21 mm, Length: 1-1/2" inches, (Outer Diameter) Hex-end: 1-3/16" inches, Drive-end: 1-3/16" inches, Hex-end depth: 1/2" inches, Weight: 0.86 lbs. Torque strength ASME/ANSI B107.33: 5000 lb-inches.
More Info

1/2 IN DR 6-PT 22 MM CHROME SOCKET

Hex size: 22 mm, Length: 1-1/2" inches, (Outer Diameter) Hex-end: 31.7 mm, Drive-end: 31.7 mm, Hex-end depth: 23.0 mm, Weight: 0.29 lbs. Torque strength ASME/ANSI B107.5: 5044 lb-inches.
More Info

1/2 IN DR 6-PT 22 MM IMPACT SOCKET

Hex size: 22 mm, Length: 1-1/2" inches, (Outer Diameter) Hex-end: 1-1/4" inches, Drive-end: 1-1/4" inches, Hex-end depth: 1/2" inches, Weight: 0.86 lbs. Torque strength ASME/ANSI B107.33: 5000 lb-inches.
More Info

1/2 IN DR 6-PT 23 MM CHROME SOCKET

Hex size: 23 mm, Length: 1-1/2" inches, (Outer Diameter) Hex-end: 31.7 mm, Drive-end: 31.7 mm, Hex-end depth: 24.0 mm, Weight: 0.30 lbs. Torque strength ASME/ANSI B107.5: 5044 lb-inches.
More Info

1/2 IN DR 6-PT 23 MM IMPACT SOCKET

Hex size: 23 mm, Length: 1-1/2" inches, (Outer Diameter) Hex-end: 1-1/4" inches, Drive-end: 1-1/4" inches, Hex-end depth: 1/2" inches, Weight: 1.08 lbs. Torque strength ASME/ANSI B107.33: 5000 lb-inches.
More Info

1/2 IN DR 6-PT 24 MM CHROME SOCKET

Hex size: 24 mm, Length: 1-1/2" inches, (Outer Diameter) Hex-end: 31.7 mm, Drive-end: 31.7 mm, Hex-end depth: 25.1 mm, Weight: 0.30 lbs. Torque strength ASME/ANSI B107.5: 5044 lb-inches.
More Info

1/2 IN DR 6-PT 24 MM IMPACT SOCKET

Hex size: 24 mm, Length: 1-1/2" inches, (Outer Diameter) Hex-end: 1-5/16" inches, Drive-end: 1-5/16" inches, Hex-end depth: 1/2" inches, Weight: 1.08 lbs. Torque strength ASME/ANSI B107.33: 5000 lb-inches.
More Info

1/2 IN DR 6-PT 25 MM CHROME SOCKET

Hex size: 25 mm, Length: 1-9/16" inches, (Outer Diameter) Hex-end: 34.9 mm, Drive-end: 34.9 mm, Hex-end depth: 20.1 mm, Weight: 0.31 lbs. Torque strength ASME/ANSI B107.5: 5044 lb-inches.
More Info

1/2 IN DR 6-PT 25 MM IMPACT SOCKET

Hex size: 25 mm, Length: 1-1/2" inches, (Outer Diameter) Hex-end: 1-7/16" inches, Drive-end: 1-7/16" inches, Hex-end depth: 1/2" inches, Weight: 1.19 lbs. Torque strength ASME/ANSI B107.33: 5000 lb-inches.
More Info

1/2 IN DR 6-PT 26 MM CHROME SOCKET

Hex size: 26 mm, Length: 1-9/16" inches, (Outer Diameter) Hex-end: 34.9 mm, Drive-end: 34.9 mm, Hex-end depth: 20.1 mm, Weight: 0.34 lbs. Torque strength ASME/ANSI B107.5: 5044 lb-inches.
More Info